dmesg - Intel Xeon

Return To Intel Xeon System Information

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.10.0-327.28.3.el7.x86_64 ([email protected]) (gcc version 4.8.3 20140911 (Red Hat 4.8.3-9) (GCC) ) #1 SMP Thu Aug 18 19:05:49 UTC 2016
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bffdafff] usable
BIOS-e820: [mem 0x00000000bffdb000-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000083fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.8 present.
DMI: RDO OpenStack Compute, BIOS 1.14.0-0.el7 04/01/2014
Hypervisor detected: KVM
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x840000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 0000C0000000 mask 3FFFC0000000 uncachable
  1 disabled
  2 disabled
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: last_pfn = 0xbffdb max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f6310-0x000f631f] mapped at [ffff8800000f6310]
Base memory trampoline at [ffff880000099000] 99000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
 [mem 0x00000000-0x000fffff] page 4k
BRK [0x01f36000, 0x01f36fff] PGTABLE
BRK [0x01f37000, 0x01f37fff] PGTABLE
BRK [0x01f38000, 0x01f38fff] PGTABLE
init_memory_mapping: [mem 0x83fe00000-0x83fffffff]
 [mem 0x83fe00000-0x83fffffff] page 1G
init_memory_mapping: [mem 0x83c000000-0x83fdfffff]
 [mem 0x83c000000-0x83fdfffff] page 1G
init_memory_mapping: [mem 0x800000000-0x83bffffff]
 [mem 0x800000000-0x83bffffff] page 1G
init_memory_mapping: [mem 0x00100000-0xbffdafff]
 [mem 0x00100000-0x001fffff] page 4k
 [mem 0x00200000-0x3fffffff] page 2M
 [mem 0x40000000-0x7fffffff] page 1G
 [mem 0x80000000-0xbfdfffff] page 2M
 [mem 0xbfe00000-0xbffdafff] page 4k
init_memory_mapping: [mem 0x100000000-0x7ffffffff]
 [mem 0x100000000-0x7ffffffff] page 1G
RAMDISK: [mem 0x3605c000-0x37025fff]
ACPI: RSDP 00000000000f62c0 00014 (v00 BOCHS )
ACPI: RSDT 00000000bffe14cd 00030 (v01 BOCHS  BXPCRSDT 00000001 BXPC 00000001)
ACPI: FACP 00000000bffe1261 00074 (v01 BOCHS  BXPCFACP 00000001 BXPC 00000001)
ACPI: DSDT 00000000bffdfd80 014E1 (v01 BOCHS  BXPCDSDT 00000001 BXPC 00000001)
ACPI: FACS 00000000bffdfd40 00040
ACPI: APIC 00000000bffe1355 00090 (v01 BOCHS  BXPCAPIC 00000001 BXPC 00000001)
ACPI: SRAT 00000000bffe13e5 000E8 (v01 BOCHS  BXPCSRAT 00000001 BXPC 00000001)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0x00 -> Node 0
SRAT: PXM 0 -> APIC 0x01 -> Node 0
SRAT: PXM 0 -> APIC 0x02 -> Node 0
SRAT: PXM 0 -> APIC 0x03 -> Node 0
SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff]
SRAT: Node 0 PXM 0 [mem 0x100000000-0x83fffffff]
NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xbfffffff] -> [mem 0x00000000-0xbfffffff]
NUMA: Node 0 [mem 0x00000000-0xbfffffff] + [mem 0x100000000-0x83fffffff] -> [mem 0x00000000-0x83fffffff]
Initmem setup node 0 [mem 0x00000000-0x83fffffff]
  NODE_DATA [mem 0x83ffd7000-0x83fffdfff]
Reserving 512MB of memory at 352MB for crashkernel (System RAM: 32767MB)
kvm-clock: Using msrs 4b564d01 and 4b564d00
kvm-clock: cpu 0, msr 8:3ff87001, primary cpu clock
kvm-clock: using sched offset of 10438464951 cycles
 [ffffea0000000000-ffffea0020ffffff] PMD -> [ffff88081f600000-ffff88083f5fffff] on node 0
Zone ranges:
  DMA      [mem 0x00001000-0x00ffffff]
  DMA32    [mem 0x01000000-0xffffffff]
  Normal   [mem 0x100000000-0x83fffffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00001000-0x0009efff]
  node   0: [mem 0x00100000-0xbffdafff]
  node   0: [mem 0x100000000-0x83fffffff]
On node 0 totalpages: 8388473
  DMA zone: 64 pages used for memmap
  DMA zone: 21 pages reserved
  DMA zone: 3998 pages, LIFO batch:0
  DMA32 zone: 12224 pages used for memmap
  DMA32 zone: 782299 pages, LIFO batch:31
  Normal zone: 118784 pages used for memmap
  Normal zone: 7602176 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x608
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ5 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ10 used by override.
ACPI: IRQ11 used by override.
Using ACPI (MADT) for SMP configuration information
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
PM: Registered nosave memory: [mem 0xbffdb000-0xbfffffff]
PM: Registered nosave memory: [mem 0xc0000000-0xfeffbfff]
PM: Registered nosave memory: [mem 0xfeffc000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xfffbffff]
PM: Registered nosave memory: [mem 0xfffc0000-0xffffffff]
e820: [mem 0xc0000000-0xfeffbfff] available for PCI devices
Booting paravirtualized kernel on KVM
Detected CPU family 6 model 85
Warning: Intel CPU model - this hardware has not undergone upstream testing. Please consult  for more information
setup_percpu: NR_CPUS:5120 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 33 pages/cpu @ffff88083fc00000 s95424 r8192 d31552 u524288
pcpu-alloc: s95424 r8192 d31552 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 
KVM setup async PF for cpu 0
kvm-stealtime: cpu 0, msr 83fc0f240
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8257380
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
x86/fpu: xstate_offset[3]: 03c0, xstate_sizes[3]: 0040
x86/fpu: xstate_offset[4]: 0400, xstate_sizes[4]: 0040
x86/fpu: xstate_offset[5]: 0440, xstate_sizes[5]: 0040
x86/fpu: xstate_offset[6]: 0480, xstate_sizes[6]: 0200
x86/fpu: xstate_offset[7]: 0680, xstate_sizes[7]: 0400
xsave: enabled xstate_bv 0xff, cntxt size 0xa80
AGP: Checking aperture...
AGP: No AGP bridge found
Memory: 32406132k/34603008k available (6444k kernel code, 1049116k absent, 1147760k reserved, 4265k data, 1632k init)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
	RCU restricting CPUs from NR_CPUS=5120 to nr_cpu_ids=4.
	Offload RCU callbacks from all CPUs
	Offload RCU callbacks from CPUs: 0-3.
NR_IRQS:327936 nr_irqs:456 0
Console: colour VGA+ 80x25
console [tty0] enabled
console [ttyS0] enabled
allocated 134217728 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
tsc: Detected 2494.140 MHz processor
Calibrating delay loop (skipped) preset value.. 4988.28 BogoMIPS (lpj=2494140)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 4096
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
mce: CPU supports 10 MCE banks
Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0
tlb_flushall_shift: 6
Freeing SMP alternatives: 28k freed
ACPI: Core revision 20130517
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 24602 entries in 97 pages
Enabling x2apic
Enabled x2apic
Switched APIC routing to physical x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel Xeon Processor (Skylake, IBRS) (fam: 06, model: 55, stepping: 04)
TSC deadline timer enabled
Performance Events: unsupported p6 CPU model 85 no PMU driver, software events only.
KVM setup paravirtual spinlock
NMI watchdog: disabled (cpu0): hardware events not enabled
kvm-clock: cpu 1, msr 8:3ff87041, secondary cpu clock
KVM setup async PF for cpu 1
kvm-stealtime: cpu 1, msr 83fc8f240
kvm-clock: cpu 2, msr 8:3ff87081, secondary cpu clock
KVM setup async PF for cpu 2
kvm-stealtime: cpu 2, msr 83fd0f240
smpboot: Booting Node   0, Processors  #1 #2 #3 OK
kvm-clock: cpu 3, msr 8:3ff870c1, secondary cpu clock
Brought up 4 CPUs
smpboot: Total of 4 processors activated (19953.12 BogoMIPS)
KVM setup async PF for cpu 3
kvm-stealtime: cpu 3, msr 83fd8f240
devtmpfs: initialized
EVM: security.selinux
EVM: security.ima
EVM: security.capability
atomic64 test passed for x86-64 platform with CX8 and with SSE
NET: Registered protocol family 16
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130517/hwxface-571)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20130517/hwxface-571)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20130517/hwxface-571)
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
acpiphp: Slot [3] registered
acpiphp: Slot [4] registered
acpiphp: Slot [5] registered
acpiphp: Slot [6] registered
acpiphp: Slot [7] registered
acpiphp: Slot [8] registered
acpiphp: Slot [9] registered
acpiphp: Slot [10] registered
acpiphp: Slot [11] registered
acpiphp: Slot [12] registered
acpiphp: Slot [13] registered
acpiphp: Slot [14] registered
acpiphp: Slot [15] registered
acpiphp: Slot [16] registered
acpiphp: Slot [17] registered
acpiphp: Slot [18] registered
acpiphp: Slot [19] registered
acpiphp: Slot [20] registered
acpiphp: Slot [21] registered
acpiphp: Slot [22] registered
acpiphp: Slot [23] registered
acpiphp: Slot [24] registered
acpiphp: Slot [25] registered
acpiphp: Slot [26] registered
acpiphp: Slot [27] registered
acpiphp: Slot [28] registered
acpiphp: Slot [29] registered
acpiphp: Slot [30] registered
acpiphp: Slot [31] registered
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff]
pci_bus 0000:00: root bus resource [mem 0x840000000-0x8bfffffff]
pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
pci 0000:00:01.1: reg 0x20: [io  0xc100-0xc10f]
pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
pci 0000:00:01.2: [8086:7020] type 00 class 0x0c0300
pci 0000:00:01.2: reg 0x20: [io  0xc0c0-0xc0df]
pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
pci 0000:00:01.3: quirk: [io  0x0600-0x063f] claimed by PIIX4 ACPI
pci 0000:00:01.3: quirk: [io  0x0700-0x070f] claimed by PIIX4 SMB
pci 0000:00:02.0: [1013:00b8] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xfc000000-0xfdffffff pref]
pci 0000:00:02.0: reg 0x14: [mem 0xfebd0000-0xfebd0fff]
pci 0000:00:02.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref]
pci 0000:00:03.0: [1af4:1000] type 00 class 0x020000
pci 0000:00:03.0: reg 0x10: [io  0xc000-0xc03f]
pci 0000:00:03.0: reg 0x14: [mem 0xfebd1000-0xfebd1fff]
pci 0000:00:03.0: reg 0x20: [mem 0xfe000000-0xfe003fff 64bit pref]
pci 0000:00:03.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
pci 0000:00:04.0: [1af4:1004] type 00 class 0x010000
pci 0000:00:04.0: reg 0x10: [io  0xc040-0xc07f]
pci 0000:00:04.0: reg 0x14: [mem 0xfebd2000-0xfebd2fff]
pci 0000:00:04.0: reg 0x20: [mem 0xfe004000-0xfe007fff 64bit pref]
pci 0000:00:05.0: [1af4:1003] type 00 class 0x078000
pci 0000:00:05.0: reg 0x10: [io  0xc080-0xc0bf]
pci 0000:00:05.0: reg 0x14: [mem 0xfebd3000-0xfebd3fff]
pci 0000:00:05.0: reg 0x20: [mem 0xfe008000-0xfe00bfff 64bit pref]
pci 0000:00:06.0: [1af4:1002] type 00 class 0x00ff00
pci 0000:00:06.0: reg 0x10: [io  0xc0e0-0xc0ff]
pci 0000:00:06.0: reg 0x20: [mem 0xfe00c000-0xfe00ffff 64bit pref]
pci 0000:00:07.0: [8086:25ab] type 00 class 0x088000
pci 0000:00:07.0: reg 0x10: [mem 0xfebd4000-0xfebd400f]
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
ACPI: Enabled 2 GPEs in block 00 to 0F
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0xbffdb000-0xbfffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
Switching to clocksource kvm-clock
pnp: PnP ACPI init
ACPI: bus type PNP registered
pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
pnp 00:03: [dma 2]
pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
pnp: PnP ACPI: found 5 devices
ACPI: bus type PNP unregistered
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff]
pci_bus 0000:00: resource 8 [mem 0x840000000-0x8bfffffff]
NET: Registered protocol family 2
TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP: reno registered
UDP hash table entries: 16384 (order: 7, 524288 bytes)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
NET: Registered protocol family 1
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
pci 0000:00:01.0: PIIX3: Enabling Passive Release
pci 0000:00:01.0: Activating ISA DMA hang workarounds
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
pci 0000:00:02.0: Boot video device
PCI: CLS 0 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 16168k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xbbfdb000-0xbffdb000] (64MB) mapped at [ffff8800bbfdb000-ffff8800bffdafff]
microcode: CPU0 sig=0x50654, pf=0x1, revision=0x1
microcode: CPU1 sig=0x50654, pf=0x1, revision=0x1
microcode: CPU2 sig=0x50654, pf=0x1, revision=0x1
microcode: CPU3 sig=0x50654, pf=0x1, revision=0x1
microcode: Microcode Update Driver: v2.00 , Peter Oruba
sha1_ssse3: Using AVX2 optimized SHA-1 implementation
sha256_ssse3: Using AVX2 optimized SHA-256 implementation
futex hash table entries: 1024 (order: 4, 65536 bytes)
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1606894792.917:1): initialized
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 32768
Key type big_key registered
SELinux:  Registering netfilter hooks
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: does not run on family 6 model 85
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
00:04: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
rdac: device handler registered
hp_sw: device handler registered
emc: device handler registered
alua: device handler registered
libphy: Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:01.2: UHCI Host Controller
uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:01.2: detected 2 ports
uhci_hcd 0000:00:01.2: irq 11, io base 0x0000c0c0
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 3.10.0-327.28.3.el7.x86_64 uhci_hcd
usb usb1: SerialNumber: 0000:00:01.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
rtc_cmos 00:00: RTC can wake from S4
rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:00: alarms up to one day, y3k, 114 bytes nvram
cpuidle: using governor menu
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
drop_monitor: Initializing network drop monitor service
TCP: cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
NET: Registered protocol family 17
Loading compiled-in X.509 certificates
Loaded X.509 cert 'CentOS Linux kpatch signing key: ea0413152cde1d98ebdca3fe6f0230904c9ef717'
Loaded X.509 cert 'CentOS Linux Driver update signing key: 7f421ee0ab69461574bb358861dbe77762a4201b'
Loaded X.509 cert 'CentOS Linux kernel signing key: 15646f1e11b73f8c2aed8ae291655d5258056ee9'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
IMA: No TPM chip found, activating TPM-bypass!
rtc_cmos 00:00: setting system clock to 2020-12-02 07:39:53 UTC (1606894793)
Freeing unused kernel memory: 1632k freed
systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
systemd[1]: Detected virtualization kvm.
systemd[1]: Detected architecture x86-64.
systemd[1]: Running in initial RAM disk.
systemd[1]: Set hostname to .
systemd[1]: Reached target Timers.
systemd[1]: Starting Timers.
systemd[1]: Created slice -.slice.
systemd[1]: Starting -.slice.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Journal Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting udev Kernel Socket.
systemd[1]: Reached target Local File Systems.
systemd[1]: Starting Local File Systems.
systemd[1]: Created slice System Slice.
systemd[1]: Starting System Slice.
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Started dracut ask for additional cmdline parameters.
systemd[1]: Reached target Slices.
systemd[1]: Starting Slices.
systemd[1]: Starting dracut cmdline hook...
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting udev Control Socket.
systemd[1]: Reached target Sockets.
systemd[1]: Starting Sockets.
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Reached target Swap.
systemd[1]: Starting Swap.
systemd[1]: Starting Journal Service...
systemd[1]: Started Load Kernel Modules.
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Started Apply Kernel Variables.
systemd[1]: Started Create Static Device Nodes in /dev.
systemd[1]: Started Journal Service.
libata version 3.00 loaded.
FDC 0 is a S82078B
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
ata_piix 0000:00:01.1: version 2.13
scsi host0: ata_piix
scsi host1: ata_piix
ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc100 irq 14
ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc108 irq 15
virtio-pci 0000:00:03.0: irq 24 for MSI/MSI-X
virtio-pci 0000:00:03.0: irq 25 for MSI/MSI-X
virtio-pci 0000:00:03.0: irq 26 for MSI/MSI-X
virtio-pci 0000:00:03.0: irq 27 for MSI/MSI-X
virtio-pci 0000:00:03.0: irq 28 for MSI/MSI-X
virtio-pci 0000:00:03.0: irq 29 for MSI/MSI-X
virtio-pci 0000:00:03.0: irq 30 for MSI/MSI-X
virtio-pci 0000:00:03.0: irq 31 for MSI/MSI-X
virtio-pci 0000:00:03.0: irq 32 for MSI/MSI-X
virtio-pci 0000:00:05.0: irq 33 for MSI/MSI-X
virtio-pci 0000:00:05.0: irq 34 for MSI/MSI-X
virtio-pci 0000:00:04.0: irq 35 for MSI/MSI-X
virtio-pci 0000:00:04.0: irq 36 for MSI/MSI-X
virtio-pci 0000:00:04.0: irq 37 for MSI/MSI-X
virtio-pci 0000:00:04.0: irq 38 for MSI/MSI-X
usb 1-1: new full-speed USB device number 2 using uhci_hcd
scsi host2: Virtio SCSI HBA
scsi 2:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    2.5+ PQ: 0 ANSI: 5
ata1.01: NODEV after polling detection
ata1.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
ata1.00: configured for MWDMA2
scsi 0:0:0:0: CD-ROM            QEMU     QEMU DVD-ROM     2.5+ PQ: 0 ANSI: 5
usb 1-1: New USB device found, idVendor=0627, idProduct=0001
usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=5
usb 1-1: Product: QEMU USB Tablet
usb 1-1: Manufacturer: QEMU
usb 1-1: SerialNumber: 42
sd 2:0:0:0: [sda] 41943040 512-byte logical blocks: (21.4 GB/20.0 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 63 00 00 08
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sr 0:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
cdrom: Uniform CD-ROM driver Revision: 3.20
 sda: sda1
sr 0:0:0:0: Attached scsi CD-ROM sr0
sd 2:0:0:0: [sda] Attached SCSI disk
input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:01.2/usb1/1-1/1-1:1.0/input/input2
hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:01.2-1/input0
input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3
tsc: Refined TSC clocksource calibration: 2494.125 MHz
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
systemd-journald[114]: Received SIGTERM from PID 1 (systemd).
SELinux:  Disabled at runtime.
SELinux:  Unregistering netfilter hooks
type=1404 audit(1606894796.354:2): selinux=0 auid=4294967295 ses=4294967295
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: Inserted module 'ip_tables'
EXT4-fs (sda1): re-mounted. Opts: (null)
systemd-journald[365]: Received request to flush runtime journal from PID 1
i6300esb: Intel 6300ESB WatchDog Timer Driver v0.05
i6300esb: initialized (0xffffc90003478000). heartbeat=30 sec (nowayout=1)
input: PC Speaker as /devices/platform/pcspkr/input/input4
piix4_smbus 0000:00:01.3: SMBus Host Controller at 0x700, revision 0
sd 2:0:0:0: Attached scsi generic sg0 type 0
sr 0:0:0:0: Attached scsi generic sg1 type 5
[drm] Initialized drm 1.1.0 20060810
AES CTR mode by8 optimization enabled
ppdev: user-space parallel port driver
[TTM] Zone  kernel: Available graphics memory: 16211980 kiB
[TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] fb mappable at 0xFC000000
[drm] vram aper at 0xFC000000
[drm] size 33554432
[drm] fb depth is 24
[drm]    pitch is 3072
fbcon: cirrusdrmfb (fb0) is primary device
alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
alg: No test for crc32 (crc32-pclmul)
Console: switching to colour frame buffer device 128x48
cirrus 0000:00:02.0: fb0: cirrusdrmfb frame buffer device
cirrus 0000:00:02.0: registered panic notifier
[drm] Initialized cirrus 1.0.0 20110418 for 0000:00:02.0 on minor 0
type=1305 audit(1606894797.195:3): audit_pid=483 old=0 auid=4294967295 ses=4294967295 res=1
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
EXT4-fs (sda1): resizing filesystem from 2620416 to 5240950 blocks
attempt to access beyond end of device
sda1: rw=0, want=41927608, limit=41927602
EXT4-fs (sda1): resized filesystem to 5240950

Return To Intel Xeon System Information